CO2 Monitoring to Lower the Coronavirus Threat

By Graham Martin, CEO and Chairman, EnOcean Alliance

There is increasing evidence that carbon dioxide levels in buildings correlate strongly with the airborne spread of infection. Consequently, CO2 monitors could act as the “canary in the coalmine” to mitigate the coronavirus threat.

Carbon dioxide is generated by the exhaled air of people who stay indoors. Each person in a building will exhale approximately eight litres of air per minute: air that has been in close contact with the lung tissue(1). Alongside CO2 at a concentration around 40,000 parts per million (ppm), the exhalation also contains tiny liquid droplets (aerosols) which, due to their size, can float in the air for a long time. These droplets will contain any virus particles present in the lungs. Research shows a method to mitigate infection can be implemented with CO2 monitors on site.

There is some consensus that sinking speeds of such aerosols are typically a few meters per hour and a decrease in biological virus infection activity has a half-life of approximately three hours in laboratory conditions(2)). This means that the room air remains polluted for a long time. If a healthy person inhales these contaminated droplets, and if the number of virus particles they contain exceeds a minimum infectious dose, the disease is transmitted. Whilst it is difficult to measure the viral load directly, energy harvesting wireless sensors are the ideal way to monitor CO2 levels and hence prevent the build-up of reused air.

Measuring COVID transmission by proxy

With evidence like this increasingly pointing towards airborne transmission being a major factor in the spread of the virus, the inference is that CO2 levels in rooms and other enclosed spaces may be used as a proxy for COVID-19 transmission risk.

Since the coronavirus is spread through the air, higher CO2 levels in a room likely mean there is a higher chance of transmission if an infected person is inside”, leading aerosol scientist Prof Shelly Miller writes in The Conversation. “Simply put, the more fresh, outside air inside a building, the better. Bringing in this air dilutes any contaminant in a building, whether a virus or a something else, and reduces the exposure of anyone inside.”

A 2019 study on a tuberculosis outbreak in Taipei University, Taiwan, provides detailed evidence. Many of the rooms were poorly ventilated and reached CO2 levels above 3,000 ppm. When engineers brought levels down to under 600 ppm the outbreak stopped.

What level is safe?

Elsewhere, Prof John Wenger, director of the Centre for Research into Atmospheric Chemistry in UCC suggests a target of 1,000 ppm if CO2 is being used as a proxy for COVID-19 in classrooms, and argues that room level transmission is “the key. It’s in the air, and it can fill a room. The amount of the virus in the air can accumulate, and we get an increased exposure. If you’re indoors, in a poorly ventilated room for a long time, then you’re at quite a high risk even if you’re distanced, because the air moves around.

Indoor CO2 measurements using easy and low-cost to install sensors hold promise for mass monitoring of indoor aerosol transmission risk for Covid-19 and other respiratory diseases. Different CO2 level targets should be set based on the environment and activity type, since infection risk level has been shown to vary by a factor of 100 or more depending on the situation and activity type. Factors such as the number of infected people in a region, and measures such as mask-wearing or air filtration may reduce presence of the airborne virus without reducing CO2 levels. Certain activities increase virus emission far more than CO2 levels, such as talking, singing and shouting. Both CO2 and the virus are diluted by ventilation with outdoor air. They are not, however removed by recirculating the air, for example through heat exchangers.

The air that you breathe

If we are in a room with several people, the measurement of the CO2 concentration provides a measure of what percentage of the air we inhale which consists of air that has already been exhaled by other people. The mass balance shows that a measured CO2 concentration of approx. 1200 ppm means that almost 2% of the air in the room has already had lung contact at least once. At this level, every 50th breath that a person takes in this room consists of air that has already been exhaled. The resulting specific corona infection risk is more complex to quantify, as it depends on various factors that are currently still being intensively researched.(1) Notwithstanding these caveats, it is clear that CO2 measurement offers a cost-effective solution for classifying the current risk from potentially infectious aerosols.

Strategies to reduce infection risk

Putting the research into practice, the Federal Environment Agency has drawn up general guidelines for health assessment of carbon dioxide in indoor air, which includes advice regarding SARS-CoV-2 – advice that is also relevant to COVID-19. Accordingly, a concentration of <1000 ppm is hygienically harmless. The guideline classifies a concentration between 1000 and 2000 ppm as questionable and anything above it as unacceptable. CO2 is also an important indicator in the DGHK (Deutsche Gesellschaft für das hochbegabte Kind – German society for gifted children) statement on prevention in schools.

Similarly, the UBA (Umweltbundesamt – German Environment Agency) ventilation working group recommends the use of CO2 traffic lights for this purpose. The DGVU (Unfallkasse) goes even further and advocates a target value of 700 ppm in classrooms in times of epidemic. The latest findings are summarized in the UBA guide “Ventilation in schools” (15.10.20), which was created for the KMK (Kultusminister der Länder in der Bundesrepublik Deutschland).

Ventilation means not only air exchange, but also heat loss in winter. A sustainable strategy should also take this effect into account. Where there is no modern air-conditioning technology with a heat exchanger, only monitoring of the CO2 and demand-oriented or regular manual cross ventilation helps. REHVA, the Federation of European Heating, Ventilation and Air Conditioning Associations has called for the installation in school classrooms of CO2 monitors with traffic-light indicators, “at least in schools where ventilation depends on opening windows and / or grids”.

CO2 sensor implementation

To follow these strategies, CO2 monitoring devices need to be dependable, and easy to place where they are needed. Ideally, they need to be connected, for example to trigger alarms when CO2 concentration goes above “traffic light” thresholds, even to send alarms to building management networks, or to smartphones via wireless networks. Wireless, battery-free sensors represent the ideal solution. Simple to fit and easy to maintain, such sensors utilize energy harvesting technology to draw energy from their surroundings – for example from motion, light or temperature differences. Rapidly deployed, without the need for special installation or wiring, such solutions enable continuous monitoring of carbon dioxide concentration in the ambient air.

Dashboard for continuous monitoring of carbon dioxide concentration in the ambient air (source: EnOcean GmbH)

By sending measured values to a receiver or gateway for further processing, alarms can be triggered, and appropriate action initiated. For example, it is possible to start a room ventilation system in order to reduce the CO2 concentration. What is more, a wide range of these CO2 sensors work within the ecosystem of standards like the EnOcean Alliance. This means that they can easily combine with other devices, such as room occupancy sensors and access control, that are integral to COVID-19 measures.



  1. COVID-19 Prävention: CO2-Messung und bedarfsorientierte Lüftung –
  2. Modelling aerosol transport and virus exposure with numerical simulations in relation to SARS-CoV-2 transmission by inhalation indoors –

Related Articles

EnOcean: not religious about radios and protocols.

EnOcean: not religious about radios and protocols.

Incisor.TV talks with Raoul Wijgergangs, CEO EnOcean GmbH For many years, Incisor.TV has tracked EnOcean, the EnOcean Alliance and the eco-system based on the wireless EnOcean radio standard. We will readily admit that we’ve been a believer in the EnOcean energy...

STMicroelectronics Accelerates Wireless Product Development

STMicroelectronics Accelerates Wireless Product Development

STM32Cube ecosystem extended to support STM32WB wireless MCUs STMicroelectronics has told Incisor.TV that it is easing the design of competitively priced and power-efficient wireless equipment for applications like smart buildings, smart industry, and smart...



Submit a Comment

Your email address will not be published. Required fields are marked *

Stay Up to Date With The Latest News & Updates

News By Email

This site is continually updated with new videos, features and news. Subscribe here for regular updates sent directly to your inbox!

Select list(s) to subscribe to

By submitting this form, you are consenting to receive marketing emails from: Incisor, Click I.T. Ltd, Rake, GU33 7JR, You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact

Our Sponsors

Incisor.TV partners with leading organisations in the technology sector.

Follow Us

And stay up to date with our news! We are active across the key social media platforms – please do follow us!